Software Setting
 
 

*Comm

Use this UI to select the port to which your UPS is connected , together with its baud rate, parity, data and stop bits information. The default baud rate is 2400.
 
 

*Commands

The function allow you to set your modem's initialization code by use AT commands.
 
 

*Recording

This function allows you to set the time delays at which data recordings are made for eventual display in graphs depicting the performance of your UPS. First press "Enable Recording" and then set the recording time delay, by either typing the delay required in the space provided or using the arrows buttons.

UPSmart can save up to one thousand points of data from your UPS. Use this data to analysis your UPS performance over a period of time.

The time intervals used are set in the record options. You can make these settings in accordance with your actual needs. System settings are at once every sixty seconds.
 

*Warning

This page allows you to set the times at which warnings will be given in the case of AC power failure or shutdown .You can also specify the frequency at which these warnings are issued . Simply set the time in the spaces provided and press "OK".
 
 

*Style

Pull down the list at the right to choose the software UI style in the pull down list.